Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Model #
327Wb
Modern Writing
Desk
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for
commercial use.
•
Do not climb, sit or stand on this unit.
•
Unload items before you move this unit.
•
Do not overload the drawer.
•
Before you load or move this unit, check all screws
and supports for tightness.
• Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
• Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
10/13
Manuales relacionados para Whittier Wood 327Wb
Resumen de contenidos para Whittier Wood 327Wb
- Página 1 For a replacement portion of this page), the part letter, production code, part, directly contact Whittier Wood Products customer quantity needed, reason for replacement and your full service department by phone, fax, mail or email.
- Página 2 327Wb Modern Writing Desk — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Part Description Quantity...
- Página 3 Figure 2. Position leg/stretcher assembly outside and against the corners of the aprons. Insert a 3/8" x 2-1/2" Hex Bolt (S) with a Washer (T) through the corner brace and into the Insert Nut in each leg. See Figure 2a. Page 3 – 327Wb – 10/13...
- Página 4 3. Using the predrilled holes as guides, insert #8 x 1-1/4" Pan Head Screws (Lb) through the stretchers and into the legs as shown in Figure 3. 4. Turn the unit upright and insert the Drawer (E). Page 4 – 327Wb – 10/13...
- Página 5 Whittier Wood Products por teléfono, fax, dirección y numero de teléfono. correo postal o electrónico.
- Página 6 Introduzca un perno hexagonal 3/8" x 2-1/2" con una arandela (T) a través de la esquinera y en la tuerca en cada pata. Ver Figura 2a. Page 2 SP — 327Wb — 10/13...
- Página 7 à la pièce, le code de production, la quantité remplacement, merci de contacter directement le service à nécessaire, le motif du remplacement, votre nom complet, la clientèle de Whittier Wood Products par téléphone, adresse et numéro de téléphone. télécopieur, adresse postale ou courriel.
- Página 8 Insérez un boulon hexagonal 3/8 po x 2-1/2 po (S) avec une rondelle (T) dans le bloc de coin, puis dans l’écrou d’insertion de chaque pied. Voir la Figure 2a Page 2 FR — 327Wb — 10/13...
- Página 9 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
- Página 10 Whittier Finishing Hints Preparing the surface apply additional coats. Lightly sand and wipe surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.
- Página 11 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
- Página 12 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
- Página 13 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
- Página 14 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. toujours les instructions figurant sur le produit. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...