Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Mission Table Collection
Assembly Instructions
Model #
314Wb
Mission Coffee Table
316Wb
Mission End Table
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb, sit or stand on this unit.
• Unload items before you move this unit.
• Do not overload the drawer or shelf.
• Before you load or move this unit, check to make sure all screws
and supports are tight.
• Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
• Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
10/13
loading

Resumen de contenidos para Whittier Wood 314Wb

  • Página 1 For a replacement portion of this page), the part letter, production code, part, directly contact Whittier Wood Products customer quantity needed, reason for replacement and your full service department by phone, fax, mail or email.
  • Página 2 314Wb, 316Wb Mission Table Collection — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Part Description...
  • Página 3 Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench, Mallet or Padded Hammer, Wood Glue IMPORTANT: Apply finish to this unit before you begin this assembly. Before doing so, read the enclosed finishing hints. 314Wb shown in the following illustrations. DO NOT GLUE THE SLATS. Fig. 1 1.
  • Página 4 Fig. 3 3. Spread a thin layer of glue in the holes of the Right and Left Legs (Eb and Fb). Place the Legs at the corners of the Shelf Assembly as shown in Figure 3. The drilled corners of the legs should face the corner braces.
  • Página 5 Whittier Wood Products por teléfono, fax, dirección y numero de teléfono. correo postal o electrónico.
  • Página 6 Correderas de la gaveta (unidas) . . 1 juego Tornillo de cabeza troncocónica #8x1-1/4" ..29 (25 insertado) (314Wb) Taquete de madera ..25 (21 insertado) (316Wb) .
  • Página 7 à la pièce, le code de production, la quantité remplacement, merci de contacter directement le service à nécessaire, le motif du remplacement, votre nom complet, la clientèle de Whittier Wood Products par téléphone, adresse et numéro de téléphone. télécopieur, adresse postale ou courriel.
  • Página 8 Vis à tête cylindrique no. 8 x 1-1/4 po Coulisses de tiroir (insérées) ..29 (25 insérée) (314Wb) Cheville en bois ..25 (21 insérée) (316Wb) no.
  • Página 9 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
  • Página 10 Whittier Finishing Hints Preparing the surface apply additional coats. Lightly sand and wipe surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.
  • Página 11 Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 12 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.
  • Página 13 Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 14 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. toujours les instructions figurant sur le produit. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...

Este manual también es adecuado para:

316wb