For specifications, go to intellinet-network.com. Register your product at register.
intellinet-network.com/r/562034 or scan the QR code on the cover.
Front Panel
This switch is equipped with six Gigabit ports; four are PoE-enabled and two are Gigabit
uplink ports. Each of the four PSE ports (Ports 1-4) can provide up to 30 watts (with total
capacity of up to 60W); non-PoE devices only receive data. The product is compliant with
802.3af and IEEE 802.3at standards and can be powered either by the included adapter or
via PoE. Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn't
indicate a link or activity, check the corresponding device for proper setup and operation.
LED
Color
Off
PWR
Orange
On
Off
Link/
On
Green
Act
Flashing
Off
PoE
Orange
On
Flashing Abnormal power supply
Rear Panel
Chassis Ground Column
Wire the grounding terminal to an earth grounding object to
protect equipment from external electrical surges.
Power
Use the included power cord to connect the device to an AC outlet.
Confirm that the PWR LED on the front panel is lit.
2
English
Status
No power is supplied to the switch.
Power is supplied via the AC adapter or the PD port.
No network link is established.
A network link has been established.
A network link has been established and data
packets are being sent and received.
Port is not supplying power to a connected PoE device.
Port is supplying power to a connected PoE device.
Status Description
Instructions