Front Panel - Intellinet Network Solutions 561624 Instrucciones

Instructions
The Intellinet 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough offers
an array of time-saving, cost-effective features while providing superior network
throughput. No configuration is required and installation is plug and play.
For specifications, visit intelllinetnetwork.com/barcode/561624.
Features
• Supports up to 95 W power input from a PoE injector or switch (port 8)
• Provides up to seven PoE network devices with power and data (ports 1 – 7)
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Powered via PoE, DC power adapter or industrial power supply (not included)
• Two redundant DC inputs (48 – 57 V) with I/O terminal block
With a backplane speed of 16 Gbps, plenty of performance is available for your computers, servers
and other networking devices. Each of the ports automatically senses the link speed of the connected
network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.
This PoE switch is designed to provide compatible devices with enough power when needed.
It offers up to 30 watts of power per port until its power budget of 120 watts is reached.

Front Panel

DIP Switch — VLAN
2 English
LED Color
PWR Green
10/100M/1000M Green
PoE Orange
OFF: default mode; allows normal communication between ports 1 – 8.
ON: isolates ports 1 – 7 from each other but allows them to connect to
port 8; increases the forwarding rate when broadcast storms occur.
8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough
Status Status Description
On Power on
Off Power off
On Valid port connection
Blinking Sending or receiving data
Off No link established
On The connected device is receiving power
Blinking Abnormal power supply
Off No powered device (PD) connected