Linsar AF-601A/AFO11L-ECOM Manual Original página 101

Idiomas disponibles
  • ES

Idiomas disponibles

Low acrylamide preparation
Acrylamide is suspected of being a carcinogenic substance that increases
rapidly when starchy foods are heated above 175 °C.
NOTE!
Improper handling of the product can lead to damage.
- Operate the product on an easily accessible, level, dry, heat
resistant and sufficiently stable work surface. Never place the
product on the edge of the work surface.
- To avoid a build-up of heat, do not position the product directly
against a wall or under wall-mounted cabinets or similar. The
emerging steam can damage furniture.
- Keep a minimum distance of 30 cm from the rear wall of the
appliance to other objects and at least 10 cm to the sides.
- Never operate the device unattended when empty. The device
may overheat. This can damage the heating coil and the non-
stick coating and cause smoke to develop. In this case, open the
windows and ventilate the room thoroughly.
- Never place the product on or near hot surfaces (stove tops,
etc.) and never expose the product to high temperatures
(heaters, etc.) or to bad weather (rain, etc.).
- Do not let the power cable come into contact with hot parts.
- Never pour oil, water or other liquids into the product.
- Never immerse the product in water to clean it, and do not use
a steam cleaner. This can damage the product.
- Never wash the product in the dishwasher. This would destroy
it.
- Stop using the product if any of its components are cracked or
deformed. Only replace damaged components with matching
original spare parts.
Risk of damage!
101
loading