Linsar E0B/RVC-VS-ECOM Manual Original página 119

Point cleaning function
1. Place the Robot Vacuum Cleaner 1 at the
position where spot cleaning is desired.
You can also steer the Robot Vacuum
Cleaner 1 to the desired spot using the
remote control 4 (see chapter "Manual
cleaning").
2. Press spot cleaning 29 on the remote
control 4.
The Robot Vacuum Cleaner cleans an area
of approx. 1 m² by moving it in a spiral from
the inside to the outside and then from the
outside to the inside.
Edge cleaning function
1. Press Edge cleaning 26 on the remote
control 4.
The Robot Vacuum Cleaner cleans the
edges of the room and then automatically
returns to the charging station.
Start and pause
Press the on/off switch 9 on the robot vacuum cleaner 1 or Start/Pause 30 on the
remote control 4 to start the product or pause an ongoing operation.
Approach charging station
If the charge level becomes low during the cleaning process, the robot
vacuum cleaner 1 automatically returns to the charging station 2.
119