Linsar E0B/RVC-VS-ECOM Manual Original página 110

- Ensure the correct polarity when inserting the batteries. This is
shown in the battery compartment. Incorrect installation may
damage the product.
- Always use batteries of premium quality. Batteries of poor
quality may leak and cause damage.
- Before inserting the batteries, make sure the contacts inside the
battery compartment and on the battery itself are clean and
intact. Clean them if necessary.
- Always replace all batteries in a battery compartment at the
same time. Do not mix old and new batteries.
- Remove the batteries from the product if they are dead. Also
remove the batteries if you do not use the product for a
prolonged period of time. Otherwise, the batteries may leak
and cause damage.
- If the batteries are leaking, remove them immediately to
prevent damaging the product. Wear normal household rubber
gloves. Do not remove the batteries with your bare hands or
allow the battery fluid to come into contact with skin, eyes or
mucous membranes.
- If your skin has come into contact with the battery fluid, wash
your hands immediately and consult a physician if necessary.
- Batteries should be installed or replaced only by an adult.
- Keep the product away from children when the battery
compartment door is removed.
- Do not charge non-rechargeable batteries.
- The supply terminals are not to be short-circuited.
- Remove the batteries before disposing of the product.
- Dispose of spent or leaking batteries immediately in line with
the valid directives.
110