Idiomas disponibles
Idiomas disponibles
Important
When converting the appliance to a different type of gas, place the corresponding sticker (supplied as an accessory) in
the special space on the dataplate. For operation with LPG. (G30 or G31), the minimum flame adjustment screw must
be fully screwed down. These appliances are supplied in cat. II 2H3+.
Minimum flame adjustment
– Remove the knobs (push-on type).
– Light the burners and adjust the minimum flame by turning the adjustment
screw clockwise to decrease the flame and anticlockwise to increase it
(fig. 7). The screwdriver for adjustment is supplied with the accessories.
Technical Data
Technical data
Appliance category:
BURNERS
NOMINAL
POWER (kW)
Auxiliary
1.00
Semi-rapid LH
1.75
Semi-rapid RH
1.75
Triple crown
3.60
TOTAL INSTALLED NOMINAL GAS POWER (kW)
TOTAL NOMINAL CAPACITY - GAS G20 (m³/h)
TOTAL NOMINAL CAPACITY - GAS G30/G31 (g/h)
POWER / VOLTAGE / CURRENT / FREQUENCY
AIR NECESSARY FOR COMBUSTION (2 m³/h per kW of installed nominal gas power)
Technical data
Appliance category:
BURNERS
NOMINAL
POWER (kW)
Auxiliary
1.00
Semi-rapid
1.75
Rapid
3.00
Triple crown
3.80
TOTAL INSTALLED NOMINAL GAS POWER (kW)
TOTAL NOMINAL CAPACITY - GAS G20 (m³/h)
TOTAL NOMINAL CAPACITY - GAS G30/G31 (g/h)
POWER / VOLTAGE / CURRENT / FREQUENCY
AIR NECESSARY FOR COMBUSTION (2 m³/h per kW of installed nominal gas power)
II 2H3+ (G20=20mbar >> G30/G31=28-30/37mbar)
REDUCED
NOMINAL
POWER (kW)
CAPACITY G20
(m³/h)
0.65
0.095
0.70
0.167
0.70
0.167
2.10
0.343
II 2H3+ (G20=20mbar >> G30/G31=28-30/37mbar)
REDUCED
NOMINAL
POWER (kW)
CAPACITY G20
(m³/h)
0.65
0.095
0.70
0.167
1.30
0.286
2.10
0.362
Lowest
minimum
adjustment
FHNE 604 3G TC XS
INJECTORS
NOMINAL
G20
CAPACITY G30/
20 mbar
G31
(100/mm)
(g/h)
72
73
97
127
97
127
128
262
0.6 W / 220-240 V / 16 A / 50-60 Hz
FHNE 755 4G TC
INJECTORS
NOMINAL
G20
CAPACITY G30/
20 mbar
G31
(100/mm)
(g/h)
72
73
97
127
115
218
133
277
0.6 W / 220-240 V / 10 A / 50-60 Hz
Highest minimum
adjustment
fig. 7
INJECTORS
MAX
G30/G31
RECOMMENDED
28-30/37 mbar
POTS (mm)
(100/mm)
50
140
65
200
65
200
96
260
8.10
0.772
589
16.20
INJECTORS
MAX
G30/G31
RECOMMENDED
28-30/37 mbar
POTS (mm)
(100/mm)
50
140
65
220
85
240
97
260
11.30
1.077
822
19
