Idiomas disponibles
Idiomas disponibles
10
TRENTO WHITE
1
2
MONZA WHITE
1
2
PESCARA WHITE
1
2
1.
backrest adjustment
2.
height adjustment
3.
seat adjustment
4.
footrest adjustment
REMOTE CONTROL
TRENTO WHITE / PESCARA WHITE
1
2
1.
raising the chair
2.
lowering the chair
LATINA WHITE / MONZA WHITE / LATINA WHITE WITH
CHAIR HEATING FUNCTION (FIGURE ON THE RIGHT)
4
1
2
1
3
4
3
5
6
5
7
1.
raising the headrest
2.
lowering the headrest
3.
raising the chair
4.
lowering the chair
5.
lifting the seat
6.
lowering the seat
7.
chair heating LED
8.
chair heating function
PEDAL USAGE
1
TRENTO WHITE / PESCARA WHITE
1
2
2
1.
raising the chair
2.
llowering the chair
MONZA WHITE / LATINA WHITE
1
3
2
4
1.
raising the headrest
2.
lowering the headrest
2
3.
raising the chair
4.
lowering the chair
5.
lifting the seat
6.
lowering the seat
4
REGULATION RANGE
6
Seat
Footrest
adjust-
Model
adjust-
ment
8
ment (°)
(°)
LATINA
0-12
0-82
WHITE
MONZA
-
0-26
WHITE
PESCARA
-
-
WHITE
TRENTO
WHITE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded and
correspond to the technical details on the product label.
ASSEMBLING THE APPLIANCE
1.
In order for the chair to be positioned firmly, it should
be screwed to the floor.
2.
If the chair is standing on uneven ground, adjust the
feet attached to the base of the device.
5
3.
Connect the plug to the power supply.
3.2. DEVICE USE
1.
Before use, make sure the chair plug is properly
connected to the power source.
2.
The height and arrangement of the device is
controlled by a remote control or a foot pedal. To
start a given function, press and hold the button on
the remote control or pedal. Releasing the button or
pedal will hold the device in the set position.
3.
The time of continuous operation of the device
should be 6 minutes/h. In the case of the Latina White
model, the working time should be 2 minutes, and a
break of at least 18 minutes.
4.
When you have finished work, disconnect the plug
6
from the socket.
3.3. CLEANING AND MAINTENANCE
a)
Always unplug the device before cleaning it.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried
completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge
it in water.
f)
The device must be regularly inspected to check its
Back-
Height
technical efficiency and spot any damage.
rest
adjust-
g)
Use a soft, damp cloth for cleaning.
adjust-
ment
h)
Do not use sharp and/or metal objects for cleaning
ment
(mm)
(e.g. a wire brush or a metal spatula) because they
(°)
may damage the surface material of the appliance.
590-880
0-82
i)
If the covering material is significantly damaged, it is
recommended to replace it with new one.
j)
Once a year, lubricate the moving parts of the device
655-905
0-70
that are used to adjust the position.
TROUBLESHOOTING
655-905
0-76
PROBLEM
POSSIBLE CAUSE
530-860
0-74
Adjustment
• the power cord
issues
is disconnected
or connected
incorrectly
• poor
performance of
the remote control
or foot pedal
• poor efficiency of
the control box
• engine failure
Disturbing
• moving parts are
sound
not lubricated
• the hinges are
not lubricated
• engine failure
11
SOLUTION
• connect the
power cord
correctly
• replace the
remote control
or foot pedal
• contact the
manufacturer
• Lubricate the
moving parts
• Lubricate the
hinges
• replace the
engine
