Fnirsi 2C23T Manual página 43

②View screenshot:Long press
screenshot page, and press
interface,
buttons in sequence
multiple waveforms, the direction keys select the corresponding waveform,
and the button selects it.
The storage is full and must be manually deleted before saving again.
1.4 Oscilloscope ‒ Parameters
Channel
Sample rate
Analog bandwidth
Storage depth
Impedance
Time Base Range
Vertical sensitivity
Maximum measured voltage
Trigger mode
Trigger type
to enter the view saved waveform
to enter the saved waveform screenshot
NOTICE
Dual channel
50M
10M(dual channel independent 10M)
32kb
1MΩ
50ns-10s
20mV/div-10V/div （ X1）
±400V
AUTO/Normal/Single
Rising edge, Falling edge
36
,corresponds to the four
.When selecting