ENGLISH
-
High-efficiency filter
-
Instruction manual
3. PRODUCT ASSEMBLY
Please note
-
Always unplug the appliance from the mains before attaching or removing accessories.
-
Connect the flexible hose to the inlet duct and push until you hear it click into place. Fig. 2
-
Insert the stainless-steel telescopic tube into the free end of the flexible hose.
-
To extend the stainless-steel telescopic tube: press the button and pull the inner telescopic
tube outwards.
-
To mount the vacuum head on the telescopic tube, insert the telescopic tube into the
vacuum head. Adjust the telescopic tube to the desired length.
-
To mount the Airbrush base on the flexible hose: align both parts and insert the accessory
into the flexible hose.
4. OPERATION
Please note
-
Once the accessories are mounted, unwind the cable enough to plug it into the socket.
-
A yellow mark on the power cable marks the ideal length. Do not unwind the power beyond
the red mark.
-
Connect the power cable to a plug socket.
-
Press the power button to turn the vacuum cleaner on.
-
To rewind the power cable, press the cable-rewinding button with one hand and hold the
power cable with the other to avoid damage or injury resulting from a whipping effect.
Important
The appliance motor is equipped with a safety thermostat. If for any reason the vacuum
cleaner overheats, the thermostat will automatically switch off the appliance. If this happens,
switch off the vacuum cleaner and unplug it from the socket. Remove and empty the dust tank
and clean the filter. Allow the appliance to cool down for about an hour. To restart it, plug it
back into the socket and switch it on.
Accessories
-
Use the most appropriate accessory depending on the kind of cleaning:
-
Elongated brush for furniture and accessory for furniture: perfect for vacuuming dirt from
cupboards, chairs, tables, etc. without causing any damage.
36
-
Accessory for corners: use it to vacuum the dirt on corners and sockets, etc.
-
Best Friend Care Air Brush accessory for pets and upholstery: perfect for vacuuming pet
hair and for all types of fabrics and upholstery (sofas, armchairs, etc.).
5. CLEANING AND MAINTENANCE
Make sure the vacuum cleaner is not connected to the mains before cleaning or servicing it.
Cleaning the dust tank. Fig. 3
1.
Press the button on the handle of the dust tank.
2.
Remove the tank.
3.
Press the button on the bottom of the dust tank to open it.
Moving the vacuum cleaner. Fig. 4
The handle on the top of the vacuum cleaner allows for easy carrying.
Removing and cleaning the filtering system
a. Dual Cyclone filter Fig. 5
1.
Press the button on the handle of the dust tank.
Remove the tank.
2.
3.
Hold the dust tank, turn the lid counterclockwise, and remove it.
4.
Remove the Dual Cyclone filter.
5.
Clean it.
b. Air outlet filter. Fig. 6
1.
Press the button on the air outlet filter grille to open it.
2.
Remove the air outlet filter for cleaning or replacement.
-
Vacuum and shake the filters to remove every dirt that may block them and hinder correct
air circulation. Remember not to use the vacuum cleaner without the filters properly
assembled.
-
Filters cannot be washed inside a washing machine nor dried with a hair dryer.
-
Do not brush the high-efficiency filter.
Note
The vacuum cleaner's filter sponge will collect dust. This is normal and will not affect
filter performance. If the amount of dust accumulated on the filter sponge affects suction
performance, then it is advisable to remove the filter, rinse it, and leave it to dry for 48 hours
in a ventilated place away from fire or other hot objects before putting it back into the vacuum
cleaner. This should be done once every six months or when you notice a loss in suction power.
ENGLISH
CONGA ROCKSTAR MULTICYCLONIC XL ANIMAL PLUS
37