Idiomas disponibles
Idiomas disponibles
Before you begin
1. Remove packing materials from the cooktop.
2. Make sure you have received all of the supplied parts shown above in the parts list.
3. Check that the cooktop is in good condition without damage during unpacking.
4. Check the dimensions and clearances (shown below), make sure the inside of the cabinet and the
cooktop do not interfere with each other.
Product Dimensions
Product Dimensions (W x D x H) (inch)：30 x 21 x 7 3/16
Cut-out Dimensions(W x D) (inch)：28 1/2 x 19 5/8
Product Dimensions (W x D x H) (mm)：762 x 533 x 182
Cut-out Dimensions(W x D) (mm)：724 x 499
30"
[762mm]
19 3/16"
[488mm]
7 3/16"
[182mm]
1 7/16"
[37mm]
-7-
21"
[533mm]
28 1/4"
[718mm]
6 5/16"
[160mm]
3 1/4"
[82mm]
Clearance Dimensions
13" Max.
[330mm]
18" Min.
Rear wall
[457mm]
1" Min
[25.4mm]
30" Min.
[762mm]
28 1/2" [724mm]
19 5/8" [499mm]
Safety distances
Above the cooktop
The minimum safety distance given by the hood manufacturer must be maintained between the
cook top and the hood above it. See the installation instructions of the hood for these safety
measurements. If the hood manufacturerʼs instructions are not available or if flammable objects are
installed over the cook top (e.g. cabinets, utensil rail, etc.), a minimum safety distance of 30" (760
mm) must be maintained.
Minimum vertical clearances of 18 inches from top surface unit to side cabinets. Minimum horizontal
distance(s) from sides and back of appliance to adjacent vertical combustible walls extending above
the top panel, 12 inches from the left side, 12 inches from right side, 2 7/8 inches from rear wall.
Minimum clearance to combustible construction centered above cooking surface: vertical 30
inches, horizontal 30 inches. The unit overhead cabinet maximum depth: 13 inches. Minimum
horizontal distance from front edge of counter to front side of appliance, 1/4 inches.
If there are several appliances beneath a hood, and they have different minimum safety distances
always observe the largest distance.
Below the cooktop
All gas cooktop models require 7/16ʼʼ free area below cooktop height to combustible material.
Before you begin
Rear wall
-8-
