Idiomas disponibles
Idiomas disponibles
INSERT
CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column.
Push cables
into clip.
Handle Column
Hairpir7
Shift Rod
Shift Lever
Indicator
, Cables
Cable Clip
CONNECT
SHIFT ROD
1. Insert end of shift rod farthest from
bend into hole of shift lever indicator.
2.
Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
LAttach
this End To shift _
Shift Rod
Lever Indicator
REMOVE
TILLER
FROM
CRATE
1. Adjust handle assemby to lowest
position. Be sure lock lever is tight-
ened securely.
2.
Make sure shift lever indicator is in "N"
(neutral) position.
3. Tilt tiller forward by lifting handle.
Separate
cardboard cover from
leveling
shield.
4.
Rotate tiller handle to the right and
pull tiller out of carton.
CHECKTIREPRESSURE
The tires on your unit were overinfiated at
the factory for shipping purposes.
Correct
and equal tire pressure
is important
for
best
tilling performance.
• Reduce
tire pressure
to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to
better suit operator, (See "TO ADJUST
HANDLE HEIGHT" in the Service and
Adjustments section of this manual).
7
