Idiomas disponibles
Idiomas disponibles
OWNER'S MANUAL | TROUBLESHOOTING
CLEANING THE BURNER ASSEMBLY
To reduce chance of "flash-back" the procedure below should be
followed at least once a month when spiders are most active or
when your appliance has not been used for a period of time�
VIDEO TUTORIAL
How to Clean Your Burner Tube
youtube.com/watch?v=xKQTCrFCzf8
ensure that the gas is turned oFF at control knobs and gas
STEP 01
supply� Remove the griddle top�
Carefully detach and
STEP 02
remove the burner�
Clean the inside of
STEP 03
the burner:
• Run a narrow bottle brush
through each burner tube
several times� (do NoT use
wire brushes)
• Run a stiff wire bent into a small
hook through each burner tube
several times�
• Use compressed air to blow
through the burner tube and
out the burner ports� Check that
air blows through each hole�
(Wear eye protection)
Brush entire
STEP 04
outer surface of burner to
remove grime�
Clean any blocked ports
STEP 05
with stiff wire such as an open
paper clip�
Carefully replace
STEP 06
burners and reattach, with
attention to the location of the
ignition needle�
14
Fuel nozzle
Fuel nozzle
Burner opening
Burner opening
The gas rail fuel nozzle
must be reengaged within the
burner opening�
CUSTOMER SUPPORT
Visit us online at blackstoneproducts.com/support
for assistance concerning appliance use, replacement parts, or
your warranty�
CUSTOMER SUPPORT HOURS:
Monday – Friday
7:00 am – 5:00 pm (MsT)
Models: 2304 • 2305 • 2306
BLACKSTONEPRODUCTS.COM/SUPPORT
