Idiomas disponibles
Idiomas disponibles
Functions
The display is designed on the fridge door, as shown in the picture on the right:
Function Setting
•
When the refrigerator system is powered on for the first time, all icons on the display panel gets illuminated for 5s.
•
After the fridge door gets closed, the display will get extinguished automatically if no key operation within 3 minutes.
•
When the display is off, it will light up if the fridge door is opened or any key is pressed.
•
The following key operations are valid only when keys are unlocked and gets illuminated on the display.
1.1 Temperature setting
1）Fridge temperature setting
Press the "Fridge" key to select the fridge zone, with the integer digit
starting to flash, then press the "Fridge" key to adjust the integer value,
after that, press the "OK" to validate the setting; Then, the decimal digit
starts flashing, press the "Fridge" key to adjust the decimal value; finally,
press the "OK" key to validate the setting.
The fridge temperature integer digit cycles in the following sequence:
5→6→7→8→OF→2→3→4→5
'OF' represents the OFF state, and when the OF setting takes effect, the
fridge will be shut off , with the icon "℃" extinguished.
The fridge temperature decimal digit cycles in the following sequence:：
0→1→2→3→4→5→6→7→8→9→0；
Be sure to take out all the foods in the fresh food compartment before
setting this function.
When setting the fridge temperature, make sure to validate settings
of both the integer value and the decimal value. The fridge temperature
setting will be invalid if the integer value is validated only.
2）Freezer temperature setting
Press the "Freezer" key to select the freezer zone, with the integer digit
starting to flash, then press the "Freezer" key to adjust the integer value,
after that, press the "OK" to validate the setting; Then, the decimal digit
starts flashing, press the "Freezer" key to adjust the decimal value; finally,
press the "OK" key to validate the setting.
The freezer temperature integer digits cycle in the following sequence:
-18 ℃ →-17 ℃ →-16 ℃ →-24 ℃ →-23 ℃ →-22 ℃ →-21 ℃ →-20 ℃ →-19 ℃
→-18℃；
The freezer temperature decimal digit cycles in the following sequence:：
0→1→2→3→4→5→6→7→8→9→0；
When setting the freezer temperature, make sure to validate settings
of both the integer value and the decimal value. The freezer temperature
setting will be invalid if the integer value is validated only.
3）Care+ temperature setting
Press the Care+ key to adjust the temperature of the Care+ space, until
the expected temperature mode is selected, and then press the "OK" key
within 5 seconds to validate the setting, with the flickering of the current
mode indicator stopped. The temperature modes of the Care+ space
cycle as following:
Vegetables → Fruit → Chill → Vegetables.
When the fridge temperature is set to be 'OF', the Care+ mode gets
disabled.
Note: It is invalid to press the Care+ key when the fridge temperature is
set at the 'OF' mode.
1.2 ECO
1） When the ECO function is enabled, the fridge temperature will be controlled at 5.0 ℃, the freezer temperature at
EN
