Idiomas disponibles
Idiomas disponibles
TO REPLACE DUST BIN
Turn This Direction
Open
To Close For Use
(For Emptying)
Closed
(For Use)
Place dust bin lid assembly back onto top of
dust bin. Align lid marks with bin marks as
shown above in Open (For Emptying).
Rotate lid clockwise
while pressing down-
ward so that marks align as shown in
Closed (For Use),
[/
Place dust bin
/'_
back into vacuum
cleaner by insert-
ing the bottom first
and tilt back with
the dust bin han-
dle raised.
Dust Bin
Release
Push forward and
lower the dust bin
handle to lock
dust bin in place.
\
Check secondary
filter'frequently
and clean
when dirty.
Electrical Shock Hazard
Do not operate the cleaner without the
motorsafety filter. Be sure the filter is
properlyinstalledto prevent motor fail-
ure and/or electrical shock.
Always unplug power cord from electri-
cal outlet before performingany ser-
vice on vacuum.
SECONDARY FILTER
FOAM
Remove the dust bin as outlined in the
DUST BiN CLEANING
section,
Remove secondary
filter from vacuum
cleaner.
Secondary
Filter--
Wash the secondary
filter in warm soapy
water; rinse and dry thoroughly
by squeez-
ing the filter in your hand and letting it air
dry,
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondary
filter. Ensure filter is
properly
installed over filter opening.
Replace the dust bin as outined in the
DUST BiN CLEANING
section.
14
