Idiomas disponibles
Idiomas disponibles
Personal Injury Hazard
Use care if vacuum cleaner is placed
on stairs, If it falls, pemonal injuryor
propertydamage could result.
Carpet edges
Guide either side or the front of the nozzle
along a baseboard.
The full length brushes
help remove trapped dirt at carpet edges.
Stairs
Put handle in full uprightposition. Use the
crevice tool or dustingbrush. Set the On/Off
switch to ON.
MOTOR PROTECTION
SYSTEM
Thermal
Protector
This vacuum has a thermal protector which
automatically
trips to protect the vacuum
from overheating.
If a clog prevents the
normal flow of air to the motor, the thermal
protector turns the motor off automatically
to
allow the motor to cool in order to prevent
possible damage to the vacuum.
To correct problem: If this occurs, turn the
vacuum off and unplug the power cord from
the outlet to allow the vacuum to cool and
the thermal protector to reset, Check for
and remove clogs, if necessary. Also check
and clean/replaco any cloggedfilters. Wait
approximately thirty (30) minutes and plug
the vacuum in and turn back on to see if the
motor protector has reset. The motor
protector will not reset if the vacuum is not
turned off even if the vacuum has cooled
down.
PERFORMANCE
INDICATOR
SOME
MODELS
When the unit is running with normal
air
flow, the light on the performance
indicator
is off. The light comes
on whenever
the
airflow
becomes
blocked,
if that occurs,
check the dust bin, clean/replace
clogged
filters, and check other possible
clog
locations
shown in CLOG
REMOVAL.
To correct
problem: See the TROUBLE-
SHOOTING
chart.
NOTE: The
-
also come on
attachments,
_
¥_'eg°r_oancer
due to
_
_
I\
reduced
{;:::;
(._
_.J_
\ _"
airflow
\\
through
the
I_k,, _
/_
attachment.
_
_ /
11
