Idiomas disponibles
Idiomas disponibles
Inserting the battery (Abb. A)
1. Push the battery (25) along the guide into
the battery holder (7).
✔ You will hear the battery click into place.
Removing the battery (Abb. A)
1. Press and hold the battery release (27) on
the battery (25).
2. Pull the battery out of the battery holder
(7).
Switching on and off
Switching on
1. Insert the rechargeable battery (25) into
the device.
2. Set the stroke rate using the rotary wheel
(1).
3. Press the unlock button (3)
✔ The LED work lights light up, the device is
unlocked
4. Press the On/Off switch (2).
5. Wait until the device has reached its full
stroke rate.
You can guide the device with the baseplate
(Footplate) against the workpiece.
Switching off
1. Press the On/Off switch (2).
2. Press the unlock button (3)
✔ The LED work lights go out, the device is
locked
3. Do not pull the sawblade out of the cut until
it has come to a standstill.
4. Remove the rechargeable battery from the
device if you are leaving the device unatten-
ded or if you have finished working.
Lidl Home App
With the Lidl Home app, you can monitor the
device and control certain functions. The func-
tions may change with updates to the app
and firmware. For more information on the Lidl
Home app, see the instructions for the smart
battery.
Requirements
To find the device in the Lidl Home app, the fol-
lowing requirements must be met:
• The device contains the following battery:
Lidl Smart battery Smart PAPS 204 A1 or
Smart PAPS 208 A1
The device communicates with the app via
the battery.
• The smart battery is connected to the Lidl
Home app.
✔ The connection indicator on the device
lights up blue. You may have to turn on the
device.
Procedure
1. In the Lidl Home app, search for the smart
battery that is inserted in the device.
✔ The device page will be displayed.
2. If not, press the following row: Device info
PSSPA 20-Li C3
✔ The device page will be displayed.
If you cannot select the device on the smart
battery page, make sure you have selected
the correct smart battery and that the smart
battery is correctly inserted into the device.
Data and functions
• Illustration of the device: Print Illus-
tration shows interactive 3D view of the
device.
• Tool Virtual ID: Unique ID of the device
• Tool model: Model name of the device
• Tool rotation speed: Current rotation
speed of the device in RPM.
• Tool discharge current: Present current
in amperes.
• lamp switch: Switch LED work lights on
and off.
• Tool light brightness: Brightness of the
LED work lights.
Press row ⭢ Adjust the brightness: 1 –
100% (factory setting: 100%).
• Tool light delay off setting: Delay
with which the LED work lights remain lit
after they are switched off. When the LED
work lights are on, the device is not locked.
Press row ⭢ Set delay: 0 – 99 s (factory
setting: 10 s)
GB
MT
31
