Idiomas disponibles
Idiomas disponibles
Single-family video entryphone kit
The Single-family video entryphone system contains all the video
entryphone devices necessary to create a complete video entryphone
system for single-family residences or homes.
Installation notes
ATTENTION: the devices must only be installed by qualified
personnel, observing the current regulations and the guideli-
nes for video entryphone installations, which can be found in
the Technical System Manual.
Connect the apartment unit and the front door unit using a UTP LAN
1
network cable cat.5e or higher (type GW 38 189 for indoor installa-
tion or GW 38 195 for outdoor installation, or equivalent commer-
cially available cables), wired according to the "Indirect LAN cable"
diagram shown below.
Connection diagram
IN
C
OUT
LAN
GW 18 343 VT or GW 18 343 VA
+
Vout
-
L N
GW 18 361
230 Vac
GW 18 401 VT
GW 18 401 VA
Landing call push-button
5
7
24 Vac/dc
24 Vac/dc
2
6
+
-
RELAY
GW 18 302 +
GW 18 131 +
GW 18 121 +
GW 18 101 VT or GW 18 101 VA
ENGLISH
Using 1 mm
cables, the maximum distance between the power sup-
2
2
ply and the front door unit is 20 m in the case the distance between
the apartment unit and the front door unit is 100 m (the sum of the
two distances may not exceed 120 m). Using cables with a section
greater than 1 mm
terminals must be at least 14 Vdc.
3
Using 1 mm
cables, the maximum distance between the front door
2
unit and the electro-lock is 50 m.
4
Using 1 mm
cables, the maximum distance between the front door
2
unit and the open door push-button is 50 m.
5
Using 1 mm
cables, the maximum distance between the apartment
2
unit and the landing call push-button is 50 m.
6
Using 1 mm
cables, the maximum distance between the front door
2
unit relay and the electric load is 50 m.
7
Using 1 mm
cables, the maximum distance between the apartment
2
unit relay and the electric load is 50 m.
For the connections and using the inputs and outputs
available in the various devices, refer to the provided
instruction sheets.
The steps for configuring the system are described in the
manual for the video entryphone with speakerphone (GW
18 343 xx).
Pack Contents
1
Wall-mounting video entryphone with speakerphone, titanium colour
(GW 18 343 VT) or slate colour (GW 18 343 VA)
1
Audio/video module with 2 push-buttons for front door unit (GW 18 302)
1
Single audio/video power supply - DIN rail (GW 18 361)
1
Flush-mounting box for the front door unit (GW 18 131)
1
Frame for front door unit (GW 18 121)
1
Metal frame for front door unit, titanium colour (GW 18 101 VT) or
slate colour (GW 18 101 VA)
2
Fixing screws for the audio-video module to the frame
2
Video entryphone fixing screws
2
Wall plugs
2
Screws for fixing the frame to the box
4
Screws for fixing the cords to the box
4
Instruction sheets and user and installation manuals
230 Vac
1
230 Vac
open door
push-button
4
IN
LAN
EL
OUT
3
, the voltage to the front door unit power supply
2
Indirect LAN cable
RJ45
(tab towards the bottom)
1
8
conductor
pin
colour
white orange
1
orange
2
white green
3
blue
4
white blue
5
green
6
white brown
7
brown
8
RJ45
(tab towards the bottom)
1 8
conductor
colour
white green
green
white orange
blue
white blue
orange
white brown
brown
