THINK GIZMOS TG662 Manual Del Usuario página 4

2. MAINTENANCE & TROUBLESHOOTING
2.1 Battery Installation
Ensure the Toy is switched off, remove the battery covers.
●
● Insert 3x AA batteries (supplied) into the toy observing the correct polarity as indicated.
● Re-fit the battery cover and secure.
(Warning - Remove the batteries if the toy is not going to be used for a long time.)
2.2 Care & Maintenance
Keep the DinoBlaster clean by wiping it with a soft dry cloth.
●
● Keep away from exposure to direct sunlight for extended periods and keep away from
direct heat sources.
Remove batteries when not in use for an extended time.
●
● Do not drop on a hard surface or disassemble the unit.
● Do not immerse in water.
2.3 Troubleshooting
If you are having problems with your DinoBlaster
Turn the unit off.
●
● Remove the battery cover and take out batteries.
● Wait a minute for the power to dissipate.
● Replace batteries and secure the battery cover.
● Turn the unit on.
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
[email protected]
4
.