Briggs & Stratton Generac 1676-0,2 Manual Del Propietário página 12

SPECIFICATIONS
Rated Pressure ..... 2700 psi
Flow Rate .......... 2.5 gallons per minute (gpm)
Detergent .......... Use detergent approved for
pressure washers
Water SupplyTemp . Not to Exceed IO0°F
Automatic Cool .... Will cycle when water
Down System ....... reaches 125%155°E
Shipping Weight .... 90 lbs.
GENERAL MAINTENANCE
RECOMMENDATIONS
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence.To receive full
value from the warranty, the operator must maintain the high
pressure washer as instructed in this manual.
• Some adjustments will need to be made
periodically
to
properly maintain your high pressure washer. Check the
spray gun and adjustable nozzle extension assembly for wear.
• All maintenance in this manual and the engine owner's
manual should be made at {east once each season.
• Once a year you should clean or replace the spark plug,
clean or replace the air filter.A new spark
plug
and clean
air filter assure proper fuel-alr mixture and help your
engine run better and last longer. Please refer to your
engine owner's manual for more details.
• If equipped with inflatable tires, keep the air pressure
within 5 and 40 PSI.
Before Each Use
Check engine oil level.
Check water inlet screen for damage.
Check in-line filter for damage.
Check high pressure hose for leaks.
Check detergent siphoning tube and filter for damage.
Check spray gun and nozzle extensionassembly for leaks.
Rinse out garden hose to flush out debris before
connectingto pressure washer.
PRESSURE WASH ER
MAINTENANCE
Check and Clean Inlet Screen
Examine the screen on the water inlet. Clean it if the
screen isclogged or replace it if screen is damaged.
Check High Pressure Hose
The high pressure hose can develop leaks from wear,
kinking, or abuse. Inspect the hose each time before using
it. Check for cuts, leaks, abrasions or bulging of cover,
damageor movement of couplings. If any of these
conditions exist, replace the hose immediately.
_hL CAUTION!Water spraying from a leak is capable
of injecting material into skin. Inspecthose each
time before using it. NEVER repair a high pressure
hose. Replace it with another hose that exceeds the
maximum pressure rating of your pressure washer.
Check Detergent Siphoning Tube
Examine the filter on the detergent tube and clean if
clogged.The tube should fit tightly on the barbed fitting.
Examine the tube for leaks or tears. Replace the filter or
tube if either is damaged.
Cleaning Detergent Siphoning Tube
If you used the detergent siphoning tube, you must flush it
with clean water before stopping the engine.
• Placethe chemical injectionsiphon/filter in a bucket full
of clean water.
• Attach the black low pressure spray tip.
• Flush for I-2 minutes.
• Shut off the engine.
IMPORTANT: Simply shutting OFF engine will not
release pressure in the system. When the engine has
shut down, squeeze the trigger on the spray gun to
relieve the pressure in the hose.
/
12