Idiomas disponibles
Idiomas disponibles
EN
2. CONNECTION
1. Attach the high pressure hose to the pressure water outlet of the machine.
2. Attach the spray handle to the high pressure hose. Prior to operating the machine please ensure
that the high pressure hose has been completely uncoiled. Whilst the machine is in operation
the hose MUST not loop.
3. Mount the nozzle or any other equipment you want to use.
4. Connect the machine to the water and power supplies.
INSTALLATION, ELECTRICAL AND WATER CONNECTIONS
1. pressure cleaner
3. water connection
5. high pressure tube
7. spray gun
* No. 2, 3, 8 are not included
ADJUSTING FAN PATTERN
The angle of spray coming out of the lance may be adjusted on some lances by rotating the nozzle.
This will vary the spray pattern from approximately a 0° narrow high impact stream to a 60° wide fan
spray. (See Figure2)
A narrow stream has high impact force on the cleaning surface and results in maximum deep clea-
ning in a concentrated area. However, this narrow high impact spray must be used cautiously, as it
may damage some surfaces.
2. water supply hose
4. water inlet
6. water outlet
8. power supply
7
