Idiomas disponibles
Idiomas disponibles
Horizontal Vane Control
1. To adjust the direction of the air flow horizontally, press i repeatedly and select the desired
direction.
- Select H to adjust the direction of the air flow automatically.
2. To adjust the direction of the air flow vertically, press j repeatedly and select the desired direction.
- Select I to adjust the direction of the air flow automatically.
NOTE
• Adjusting the air flow direction vertically may not be supported, depending on the model.
• Adjusting the air deflector arbitrarily may cause product failure.
• If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air
deflector may not match the icon displayed on the remote control. When this occurs, press i or j to
adjust the direction of the air flow again.
Jet Cool Operation
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INDOOR FAN SPEED SELECTOR BUTTON or the ROOM TEMPERATURE SETTING BUTTON again.
NOTE
• Jet Cool operation cannot be activated during Air Circulation operation.
Forced operation
Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF
button is pressed. If you want to stop the operation, re-press the button.
ON/OFF
button
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super
high fan speed and 18°C setting temperature for 30 minutes for fast and effective
cooling.
Cooling Model
Operating mode
Cooling
Indoor FAN Speed
High
Setting Temperature
22°C
Heat pump Model
Room Temp.
≥
24°C
21°C
≤
Room Temp. < 24°C
Cooling
Healthy Dehumidification
High
High
22°C
23°C
Operating Instructions
JET
COOL
Room Temp. < 21°C
Heating
High
24°C
Owner's Manual 17
