Idiomas disponibles
Idiomas disponibles
3. INTERFACE / 4. INITIAL CONFIGURATION
3. INTERFACE
Active fan
Storage charging
Active support
resistance
Indicator bars of the confi-
gured programming.
From 00:00 to 23:59, (each
bar corresponds to an
interval of 1 hour).
4. INITIAL CONFIGURATION
12:35
OFF
SETTINGS
TEMPERATURES
TIME & DATE
PROGRAM
ADVANCED
19.5
Antifreeze
Comfort
3 bars
1 bar
Off
Eco
2 bars
1/2 bar
Press MODE to toggle between ON and
STANDBY.
In any of these modes, keep "CONF" pressed to
access SETTINGS. On this screen you will find
the following options (to scroll through them use
the + or - keys, to enter one of them confirm with
MODE):
Temperatures: In this section you can modify
the Comfort, Eco and Antifreeze temperatures.
The default values will be the ones used in
PROGRAMMING. By default the values are;
Antifreeze: 7.5ºC, Eco: 16ºC, Comfort: 20ºC.
Time and date: You will not be able to enter this
section if the device is connected to the Internet.
You can change the time, date and format
(24h/12h am-pm). To modify, scroll with +/- to
the desired option and press MODE. Once inside
the time or date option, press MODE until the
5 sg
selection flashes, adjust the value with +/- and
press MODE again to confirm.
Increase the temp.
Navigate up
Linked
Back
Advanced Settings
View Tª.
EN
Decrease the temp.
Navigate down
Turn on, turn off
Mode / Confirm
27
ECOJOULE
EN
