Idiomas disponibles
Idiomas disponibles
GB
DRY SUCTION AND AIR CLEANING
A - Motor switch
B - Cloth Filter (
*
)
C - Motor
H1 - IDRO device
H2 - IDRO separator
E - Tank
F - Suction inlet
G - Flexhose
L - Potentiometer
M - Aluminum/plastic tube (0,50m)
P - Plastic handle
S - Double-use brush (
S1 - Wet tool
T - Round brush (
*
)
U - Upholstery tool (
**
V - Flat lance (
)
*
(
)
Optional for some models
*
(
) Optional
**
DUST SUCTION
- Remove the container with liquid valve D (if foreseen) (pic.1)
- Insert cloth filter B into the tank E (pic.2)
- Assemble suction head C onto the tank and clasp the hooks (pic.3)
- Insert the hose G in the suction inlet F (pic.4)
- Insert at the other hose end handle P and extension tubes M (pic.5)
- Connect the most suitable accessory (S-T-U-V) (pic.6)
- Start suction by pushing the red push button A, after correctly plugging in
the device (pic.7)
- Adjust the speed of the motor by turning the potentiometer L (if foreseen)
(pic.8)
- Examples of use as a vacuum cleaner for dust (pics. 9-10-11-12-13)
- If a paper filter is available, insert it into the tank adjusting it on the deflector
(pic.14).
AIR CLEANING
DUST SUCTION
/
- Insert the IDRO H1 device by putting it on the baffle inside the inlet (pic.15)
- Pour water 3,5 into the tank (pic.16)
- Insert the IDRO separator H2 into the tank (pic.17)
- Ensure parts W1 - Z1 (H3) are fitted under the motor head C as indicated
- Hook up the motor head C on the tank and lock it up with the two hooks
(pic.18)
- Activate suction by pressing the red switch A, after having connected the
machine to the proper grid (pic. 7)
- Adjust the speed of the motor by turning the potentiometer L (pic.8)
LIQUID SUCTION
- Remove the cloth filter B from the tank E (pic.19)
- For models with internal holding tank, insert the tank provided with water
valve D (pic.20)
- For models with external holding tank, apply the float cage equipped with
the float under the motorhead (fig.40)
- Assemble suction head C onto the tank by inserting feeler Y in the suitable
opening of tank D and clasp the hooks (pic.21)
- Insert hose G in the suction inlet F (pic.4)
- Insert at the other hose end handle P and extension tubes (M - O - O1) (pic.5)
- Insert at the end of extension tube the wet tool S1 or the carpet tool Q and
apply the liquid front device R (pics.22-23) to intake liquids from floors.
- Start suction by pushing the red push button A, after correctly plugging in
the device (pic.7)
36
)
*
)
LIQUID SUCTION / INJECTION-EXTRACTION
A - Motor switch
A1 - Pump switch
A2 - Additional socket (
**
A3 - Quick connector (INTAKE)
A4 - Quick connector (OUTTAKE)
C - Motor
D - Detergent's tank with liquid valve
D1 - External tank
E - Tank
F - Suction inlet
G - Flexhose
H - Injection hose
I
- Upholstery tool
L - Potentiometer (
**
K - Injection hose valve
N - Injection hose
O - Stainless steel extension tube
O1 - Aluminium-plastic bend
P - Plastic handle
Q - Carpet tool
R - Liquid front device
Y - Liquid sensor
Z - Float
- Adjust the speed of the motor by turning the potentiometer L (if foreseen)
(pic.8)
- Example of use as a vacuum cleaner for liquids (pic.24-25)
WASHING WITH INJECTION-EXTRACTION SYSTEM
- Remove cloth filter B from the tank E (pic.19)
- Pour water into the external tank
D (pic.27) and, for the models with internal tank, place it into the tank E (Pic.20)
- Assemble suction head C on the tank by inserting feeler Y in the suitable
opening of tank D and clasp the hooks (pic.28).
For models with external holding tank join the connector X to the attachment
placed on the motorhead - INTAKE- (pic.29).
- Insert hose G in the suction inlet F (pic.4)
- Insert at the hose end handle P and extension tubes (M - O - O1) (pic.5)
- Insert at the end of extension tube the carpet tool Q if carpets or fitted carpets
are to be cleaned (pic.22), insert under carpet tool Q the front liquid device R
if floors or hard surfaces are to be cleaned. (pic.23)
- Link little hose K with the little hose H and N with the tap' s front union (pics.
30-32-33)
- Insert the end of H at the connection located on head C - OUTTAKE - (pics.
31-32-33)
- Fasten hoses H-N with suitable clips (pic.34)
- Start pump with green switch A1 – 1 minute ON / 1 minute OFF – and motor
with red switch A, after correctly plugging in the device (pic.7)
- Adjust the speed of the motor by turning the potentiometer L (if foreseen)
(pic.8)
- Push the tap' s lever in order to let the accessory on the surface to be cleaned
glide towards you (pic.35)
- After the running, release the tap' s lever and repeat the operation after lifting
and removing the accessory (pic.36)
- If you wish to clean tissues or armchairs, remove from handle P the extension
and remove hose N from the tap. Insert the upholstery tool I linking the hose
with the tap' s front union (pic.37). In order to start washing, put the opening
on the tissue, push the tap and pull it towards you.
- Example of use of opening I (pic.38)
ATTENTION: CLEAN REGULARLY THE FLOAT - Z - PLACED INSIDE THE PURIFYING
BUCKET - D - (pic.39) OR INSIDE THE FLOAT CAGE (pic.40) SO THAT IT CAN
FREELY MOVE IN ITS HOUSING. REGULARLY CHECK WHETHER THERE ARE
ANY SIGNS OF DAMAGE.
)
)
D1
(pic.26) or into the tank with liquid valve
