Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BEFORE USING FOR THE FIRST TIME
1.
Remove all packing material and labels from the inside and outside of the Deep
Fryer parts. Check that there is no packaging underneath and around the oil pan
and control panel/heater assembly.
2.
Wash night cover, heating element cover, frying basket, and oil pan in hot, soapy water.
DO NOT IMMERSE THE CONTROL PANEL/HEATER ASSEMBLY IN WATER.
3.
Wipe control panel/heater assembly and Deep Fryer body with a damp cloth. Dry
all parts thoroughly.
4.
Reassemble the Deep Fryer following the detailed procedures described in
ASSEMBLY INSTRUCTIONS.
5.
Replace night cover on top of the oil pan until ready to use.
ASSEMBLY INSTRUCTION
1.
Always place a non-flammable, heat-resistant coaster or placemat between the
Deep Fryer and countertop or tabletop surface.
2.
Attach Feet: To insure a perfectly level , the Deep fryer includes 4 adjustable feet.
• Place the deep fryer body upside down on a clean working surface. Locate 4
screw holes at each corner of the Deep fryer bottom.
• Insert a screw through each of the 4 feet, to the bottom of the Deep fryer.
• Turn each foot clockwise until snug.
• Place the Deep fryer on a firm and stable table or counter top.
• Test to make sure the Deep fryer is level. If not, adjust feet.
3.
Place the Deep Fryer body on a clean, flat
protected surface that is resistant to heat.
4.
Insert the empty, clean oil pan into Deep
Fryer body. Fit the oil pan handles into the
notches on the left and right sides of the
body. When the oil pan is centered, stable
and resting on top of the stainless steel body,
slide handles down.
5.
Mount the control panel/heater assembly.
Tilt the control panel upward, slide the 2 pins
located on left and right side of each side of
the heater assembly down into the 2 retaining
slots on the left and right back side of the
Deep Fryer body until the release button is sitting on the recess. Press the release
button in and rotate the control panel into the oil pan gently.
IMPORTANT: The Deep Fryer will not operate if the control panel/heater
assembly pins are not fully inserted and properly attached in the Deep Fryer
retaining slots.
6.
There is a release button for raising the heating element up and lock the heating
element in place for oil dripping. Press the release button and raising the head
more until the end. The control head can be taken out.
7.
Rest the heating element cover over the heating element. Place basket into the oil
pan.
8.
Place night cover on top of the oil pan to keep dust and foreign objects out of
the oil when the unit is not in use. The double set of cutouts in the night cover fit
easily over the frying basket handle.
8
OIL PAN HANDLES
slide up and down
HEATING
ELEMENT
slide handles
down into
notches
HANDLE NOTCHES
slide up and down
Tabla de contenido
