Idiomas disponibles
Idiomas disponibles
Determining
wall plate location
under your cabinet
Plate position - beneath fiat bottom cabinet
1/2"
Draw a vertical line on the wall at the center of the 30"
wide space.
Tape the Rear Walt Template onto the wall matching
the
centerline and touching the bottom of the cabinet.
Plate position - beneath recessed bottom cabinet with
front overhang
Plate position - beneath framed recessed cabinet bottom
Draw a line on the back
wall equal to the depth of
the front overhang•
30" to Cooktop
3.
f
30" to Cooktop
Draw a vertical line on the wall at the center of the
30" space.
Tape the Rear Wall Template onto the wall
matching the centertine and touching the bottom
cabinet frame.
Your cabinets may have decorative
trim that interferes with
the microwave
installation.
Remove the decorative
trim to
install the microwave
properly and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only t with no back
or side frame t install the mounting plate down the same
distance as the front overhang depth. This will keep the
microwave level.
1.
Measure the inside depth of the front overhang.
2.
Draw a horizontal
line on the back wall an equal
distance below the cabinet bottom as the inside depth
of the front overhang.
For this type of installation
with front overhang only,
align the mounting tabs with this horizontal
line, not
touching the cabinet bottom as described in Step D.
9
