Idiomas disponibles
Idiomas disponibles
EN
The correct helmet should:
•
be comfortable
•
be lightweight
•
have good ventilation
•
fit correctly
MAKE SURE YOUR HELMET COVERS YOUR
INCORRECT FITTING
FOREHEAD IS EXPOSED AND VULNERABLE TO
ALL STATES/COUNTRIES REQUIRE BICYCLISTS
ON THE ROADWAY TO FOLLOW THE
SAME RULES AND RESPONSIBILITIES AS
MOTORISTS. WEAR ANSI/NHTSA/NCBI/NIM/NIH/
CPSC APPROVED RIDING GEAR AND OBEY ALL
LAWS APPLICABLE IN YOUR AREA.
4.1.3 CONNECT THE BATTERY CHARGER
1. Connect the battery charger to the proper voltage
and frequency that is specified on the rating plate.
2. Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.4 CHARGE THE BATTERY
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
English (Original Instructions)
CORRECT FITTING
FOREHEAD.
SERIOUS INJURY.
WARNING
4.1.5 BATTERY INFORMATION
Refer to the Battery Operator Manual for information
about how to use the battery.
4.1.6 CONNECT THE BATTERY TO THE
PRODUCT
Ensure the battery is fully charged before operating.
1. To remove the cover, insert the key and rotate it
clockwise to the UNLOCK position.
2. Push the battery into the battery compartment. The
battery locks into position when you hear a click.
IF THE BATTERY DOES NOT FIT EASILY INTO
THE BATTERY HOLDER, IT MAY NOT BE
INSTALLED CORRECTLY, WHICH CAN CAUSE
DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3. Rotate the key to the UNLOCK position and hold it
in place. Align the cover with the battery box and
push it firmly along the ribs until it locks into place.
12
CAUTION
