Idiomas disponibles
Idiomas disponibles
BEFORE TAKING A MEASUREMENT
1. Try the device by yourself first to know how to use it.
2. It must be placed in a general environment of room
temperature of 16ºC-35ºC for at least 30 minutes
before use to avoid incorrect measurement results.
3. The person measured should be kept at room
temperature for at least 20 minutes to make body
temperature balanced.
4. After strenuous exercise, you should rest for at least
30 minutes before taking measurement.
5. Wipe the skin dry and push aside hair strands
beforecommencing.
6.
When
repeated
continuously, move away the probe between eachmea-
surement and rest for at least 5s before making the
next to obtain the most correct result.
7. The normal reading value is about 35.5ºC 37.8ºC. 8.
The user should take more temperature to know his or
her own health temperature. Pay attention to physical
changas or consult your doctor if there is any abnorma-
lity.
8. Check the probe is clean before each measurement
to ensure accuracy.
RECALLING READINGS FROM MEMORY
1. Ensure the thermometer is switched off.
2. Press the "ON/OFF/MEASURE" button for 4
seconds to put the device on memory mode. The last
reading will be displayed.
3. Press and release the "ON/OFF/MEASURE" button
again to display the next reading in a sequence from
the last reading to the first reading.
4. The thermometer has memory to recall the last 32
readings.
5. The thermometer will automatically turn off if it idles
for more than 12 seconds.
CHANGING TEMPERATURE SCALES
1. Ensure the thermometer is switched off.
2. Press the "ON/OFF/MEASURE" button for 8
seconds to bring it into temperature mode. The current
temperature unit will be displayed.
3. Release and press the ON/OFF/MEASURE button
again to toggle and select between ºC and ºF.
4. The thermometer will switch off automatically if it
idles for more than 4 seconds and will display the last
reading
WARNING!
• Do not use the thermometer under extreme tempera-
tures (below 16ºC/60.8ºF or over 35ºC/95ºF) or
humidity extremes (below 15%RH or over 80%RH).
• Do not use the thermometer under extreme tempera-
tures (below -20ºC/-4ºF or over 55ºC/131ºF) or
humidity extremes (below 15%RH or over 93%RH).
• If temperature probe has been shocked and lux,
contact your retailer immediately.
• lt is dangerous for patients to perform a self-evalua-
tion and self-treatment based on the measuring results.
Be sure to follow doctor's instruction.
• Do not touch or blow infrared sensor.
• Clean a polluted infrared sensor with a soft dry cloth in
a gentle manner. Cleaning with toilet tissue or paper
towel may scratch the infrared sensor, causing
inaccuracy.
• Install the battery in the right position according to the
measurements
are
made
manual.
• Do not immerse the thermometer in liquids, this
device is not waterproof.
• Do not use a mobile phone nearby when the thermo-
meter is working.
• If the probe glass is damaged, stop using it and
contact your retailer immediately.
• Do not modify the device.
• The device is not repairable and contains no user
serviceable parts.
• The device requires no calibration.
• If the device is modified, appropriate inspection and
testing must be conducted to ensure continued safe
use of the equipment.
• The operator shall not touch the thermometer and the
patient simultaneously.
• Keep the device out of children's reach.
• For temperature difference between storage area and
measurement site, condition the thermometer for about
30 minutes in room temperature.
• Ensure that children do not use the instrument
unsupervised. Some parts are small enought to be
swallowed.
• No servicing/maintance white the MW equipment in
use.
• The patient can measure data and change battery
under normal circumstances,
• The patient can maintain the device according to the
user manual.
ERROR MESSAGES
Error
Problem
message
Temperature is
higher than 42.2°C
(108°F).
Hi
Temperature is
lower than 32 °C
(89.6 °F).
Lo
Err
Sensor not welded.
Low power.
The temperature
of the measuring
ErH
environment is too
high.
The temperature
of the measuring
ErL
environment is
too low.
8
REF. 53794
Solution
Operate the thermometer
temperature ranges. In the
event of a repeated error
message, contact your
retailer.
Operate the thermometer
temperature ranges. In the
event of a repeated error
message, contact your
retailer.
Contact your retailer.
Replace new batteries.
Decrease the temperature
of the environment, keep it
within 16°C-35°C.
Increase the temperature
of the environment, keep it
within 16°C-35°C.
