Interface Personalisation - Selco Genesis 3000 MTE Instrucciones De Uso

Select the required program by pressing button (9)
.
Select the required program by rotating the encoder.
Only the memories location occupied by a program
are retrieved, while the empty ones are automatically
skipped.
4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
Confirm the operation by pressing button (2)
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
46

3.8 Interface personalisation

Allows the parameters to be customized on the main menu.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PROCESS
MMA
XE
TIG DC
MIG/MAG
Pulsed MIG
MMA
XA
TIG DC
MIG/MAG
Pulsed MIG
MMA
XP
TIG DC
MIG/MAG
Pulsed MIG
1 7 segment display personalisation
.
Enter set-up by pressing the encoder button for at least
5 seconds.
.
Select the required parameter by rotating the encoder.
.
Store the selected parameter in the 7 segment display
by pressing button (2)
Save and exit the current screen by pressing button (4)
.
Default I1
PARAMETER
( )
(
(
.
)
)