Idiomas disponibles
Idiomas disponibles
Manufacturer together with a part of the appliance.
Lamp type：LED light.
Energy efficiency level：G
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheated?
Note: Electric shock and fire accident may be caused in case the power cord and plug is damaged or stained by
dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts
Fridge door bottle rack:
Hold the bottle rack with both hands, and then push it up.
Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
Simple fault analysis and elimination
With regards to the following small faults, not every failure needs to be fixed by the technical service personnel; you can
try to solve the problem.
Case
Inspection
•Completely non-
•Is power plug off?
•Are breakers and fuses broken?
refrigeration
•No electricity or line trip?
•Is refrigerator stable?
•Abnormalnoise
•Does refrigerator contact the wall?
•Do you put hot food or too much food?
•Poor
•Do you open the door frequently?
•Do you clip food bag to the door gasket?
refrigeratingefficien
•Direct sunlight or near a furnace or stove?
cy
•Is it well-ventilated?
•Temperature setting in too high?
•Any spoiled food?
• Peculiar smell in
•Do you need to clean refrigerator?
refrigerator
•Have you packed food of strong flavors?
•
•Check whether the Smart, Fast Freeze or
Temperaturesetting
Vacation function is enabled on the display
impossible
panel.
•
•Ispowercutbefore?
Freezer
temperature
displayed on the
panel,
with
the
temperature digits
flashing
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
Solutions
•Re-plug
•Opening the door and checking whether the lamp
is lit.
•Adjusting refrigerator's leveling feet.
•Off the wall.
•Putting food into refrigerator when hot food
becomes cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good
ventilation.。
•Setting to the appropriate temperature.
•Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food of strong flavors.
•Exit the special function mode, and then set up
the temperature (for details refer to the Functions
section)
• Press any key to lift the alarm (refer to the
Overtemperature alarm function), and then check
the
foods
inside
the
compartments get spoiled.
fridge
and
freezer
