Idiomas disponibles
Idiomas disponibles
KNOW YOUR
E DGER ATTACHMENT
READ THiS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER A'F]-AOHMENT,Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments.
Save this manual
for future reference.
Depth Adjustment
Knob
Shaft
Hanger
j
Blade Shield
Wheel
Gearbox
BLADE
The BLADE is designed
to cut sod.
Edger Blade
DEPTH ADJUSTMENT
KNOB
The DEPTH ADJUSTMENT KNOB is
used to adjust the wheel for blade cut-
ting depth.
OPERATING
THE COUPLER
Your powerhead
is equipped with a
coupler which enables optional
attach-
ments to be installed.
The optional
attachments
are:
Cultivator
............
358.79241
Blower
..............
358.79242
Pruner
..............
358.79245
Brushcutter*
.........
358.79244
*not designed for use with electric
powerheads
,_
WARNING:
Always disconnect
powerhead
spark plug (or disconnect
powerhead
from power source) before
removing
or installing attachments.
REMOVING
ATTACHMENT
CAUTION:
When removing or instal-
ling attachments,
place the power-
head and attachment
on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Upper Shaft
Coupler
Attachment
TIGHTEN
Knob
2. Press
and
hold the
locking/release
button.
Locking/Release
Button
Upper Shaft
Attachment
3. While securely holding the upper
shaft, pull the attachment
straight
out of the coupler.
INSTALLING
ATTACHMENT
1. Remove tile shaft cap from the at-
tachment
(if present) and discard.
2. Position locking/release
button of
attachment
into guide recess of up-
per shaft coupler.
7
