Idiomas disponibles
Idiomas disponibles
Warranty Statement
2
Service & Adjustments
10
Safety Rules
2
Storage
10
Identification
of Symbols
2
Parts List
11
Assembly
6
Operation
7
Spanish
12
Maintenance
9
Parts and Ordering
Back Cover
FULL ONE YEAR WARRANTY
ON CRAFTSMAN
_;LAWN EDGER ATTACHMENT
When used and maintained according to the operator's manual, if this product fails due
to a defect in material or workmanship
within one year from the date of purchase, return
it to any Sears store, Sears Service Center, or other Craftsman outlet in the U nited States
for free repair (or replacement
if repair proves impossible).
This warranty excludes
expendable
parts that can wear out from normal use in less
than one year.
This warranty applies for only 30 days from purchase date if this product is used for
commercial
or rental purposes.
This warranty gives you specific
legal rights, and you may also have other rights
which vary from state to state.
Sears, Roebuck
and Co., Hoffman
Estates, IL 60179
DANGER!
This lawn edger
can be dangerous! Careless or
improper use can cause
serious or even fatal injury.
Read
and understand
the
operator's
manual
before
using the lawn edger.
Always wear appropriate
ear protection,
eye protection
and head protection.
_WARNING:
When using garden-
ing appliances,
basic safety precau-
tions must always be followed to re-
duce the risk of fire and serious injury.
Read and follow all instructions.
This power unit can be dangerous!
Operator
is responsible
for following
instructions
and warnings
on unit and
in manual. Read entire operator's
manual before using unit! Be thor-
oughly familiar with the controls
and
the proper use of the unit. Restrict the
use of this unit to persons who have
read, understand
and will follow the
instructions
and warnings
on the unit
and in the manual. Never allow chil-
dren to operate this unit=
AFETY INFORMATION
THE UNIT
OPERATOR
SAFETY
_,DANGER:
RISK OF OUT.
KEEP HANDS AND FEET AWAY
FROM BLADE AND CUTTING
AREA.
Do not attempt to clear away cut ma-
terial or hold material to be cut when
the blade is in motion. Make sure
powerhead
is stopped and spark plug
wire is disconnected
(or powerhead
is
disconnected
from power source)
when removing jammed material from
the cutting blade. Do not grab or hold
attachment
by the cutting blade.
2
