Idiomas disponibles
Idiomas disponibles
Air Filter Inspection
and
Replacement
Hot surfaces.
Risk of burn.
Compres-sor
heads are exposed
when filter cover is removed.
Allow compressor
to cool prior to
servicing.
Keep the air filter
clean at all times.
Do not operate
the air compressor
with the air filter removed.
A dirty air filter will not allow the com-
pressor to operate
at full capacity.
Keep the air filter clean at all times.
1.
Remove the air filter cover.
Air Filter
2.
Remove the air filter and make
sure it is clean.
IMPORTANT:
Do not operate the
compressor
with the air filter removed.
3.
If dirty, rinse air filter with warm
water and squeeze dry.
4.
Replace air filter and air filter
cover.
NOTE: If the air filter is extremely
dirty
it will need to be replaced.
Refer to
the Repair Parts for the correct
part
number.
Air Compressor
Pump
Intake
and Exhaust
Valves
Once a year have a Trained Service
Technician check the air compressor
pump intake and exhaust valves.
Air Filter
Cover
ALL MAINTENANCE
AND REPAIR
OPERATIONS
NOT LISTED MUST
BE PERFORMED
BY A TRAINED
SERVICE
TECHNICIAN.
Risk of Unsafe
Operation.
Unit
cycles automatically
when power
is on. When servicing, you may
be exposed
to voltage sources,
compressed
air, or moving parts.
Before servicing
unit unplug or
disconnect
electrical
supply to
the air compressor,
bleed tank
of pressure,
and allow the air
compressor
to cool.
To Replace
or Clean
Check
Valve
1.
Release all air pressure from air
tank. See To Drain Tank in the
Maintenance
section.
2.
Set the Auto/Off
lever to "Off" and
unplug unit.
3.
Using a phillips screwdriver,
remove the air filter cover.
4.
Remove the rear shrouds
using
T-20 torx wrench.
N015838
16- ENG
Remove
Remove
5,
Using an adjustable
wrench,
loosen outlet tube nut at air tank.
Carefully
move outlet tube away
from check valve.
6.
Using an adjustable
wrench
loosen pressure relief tube nut at
air tank. Carefully
move pressure
relief tube away from check valve.
