Gewa Music E-Cello Novita 3.0 Manual De Instrucciones página 8

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
2. Scope of delivery and specifications
Attractive spirit varnish; the wood structure remains visible
Basswood body, maple back plate
Solid maple neck
Designer scroll
Wittner fine tuning pegs
High quality ULSA endpin with ebony collar and burnished metal tube 72 cm
Wittner tailpiece
Bridge - GEWA by Korolia
Larsen Aurora strings
Specially designed GEWA pickup / aux in for play alongs
Piezo system is mounted directly on the bridge,
factory mounted on treble (recommended)
Output alternatively between headphones and amplifier
Fits in any GEWA case or gig bag
Includes 2 anti-slip pads for optional attachment to carbon frame
Batteries not included
3. Instructions for first use
Your instrument is basically in a ready-to-play condition. The bridge is in place and the
strings have been pre-tuned at the factory. Nevertheless, tune the cello to the
notes C-G-D-A using a tuning fork or tuner, starting from the lowest to the highest string.
Note here that the bridge does not tilt to either fingerboard or endpin side.
Make sure that a 9V block battery is inserted and that there is a connection either by
cable to an amplifier or headphones. After connecting the desired connection,
wait a few seconds until the pickup is ready to operate. Likewise, the selector switch must
be in the desired position (Amp/Headphone). The output on the preamp
(6.35-mm jack, mono) is correct here for both possibilities. The 9V block should be
removed during longer breaks in playing to avoid damage to the instrument.
8 EN | GEWA E-Cello Novita 3.0
loading