Timbela M339 Manual Del Usuario página 15

Wooden floors
EN
Please note that the installation of the floor must be done first, then the assembly of the garden house can be
started.
The basic frame of the house must be completely flat and level for the installation to proceed without any
problem. Place the boards on the foundation prepared according to the drawing at equal intervals.
Make sure the beams are flat and rectangular before screwing them.
It is recommended to use a moisture barrier between the foundation and the shed (leaf).
Before assembly, we recommend treating the beams with an oil-based protective product to protect the wood
against fungus, blackening and insects. After assembly, a finishing product must be applied to protect the wood
against cracks, cracks and deformations. By regularly applying a new topcoat, the life of your product will be
extended. It is also recommended to treat the interior and the door of the shed with a wood preservative. This
should be repeated every 3 years.
M339
Wooden shed
IMPORTANT!
Before starting to assemble your shelter, read the assembly instructions carefully. This will avoid problems and wasted
time. You can start the assembly after having identified, analyzed and grouped all the elements making up your shelter.
This manual also contains instructions for maintaining your shelter which will be useful to you.
WARNING!!!
- Keep the packaging until the end of assembly in a dry place, but not in direct contact with the ground and protected
from atmospheric conditions (humidity, sun, etc.). Do not store the packaging in a heated room! The materials used are
natural products and their quality may change depending on climatic conditions, despite the fact that the materials
have been dried before treatment. When choosing the place to mount your garden shed, make sure that the shed will
not be subjected to extreme weather conditions (areas of strong wind or heavy snowfall); otherwise you should fix the
shelter to the ground (with anchor pieces for example).
15