Idiomas disponibles
Idiomas disponibles
READ ALL INSTRUCTIONS AND WARNINGS IN THIS
MANUAL BEFORE USING
IMPORTANT: This cranking device is ONLY designed for use
with CenterPoint crossbows listed in the Compatibility Chart
(Section 5).
1. IMPORTANT SAFETY INFORMATION
WARNING:
RECOMMEND FOR ADULT USE ONLY. WHEN
USING THIS CRANKING DEVICE, ALWAYS USE COMMON SENSE AND
FOLLOW BASIC SAFETY PRECAUTIONS TO REDUCE THE RISK OF
SERIOUS INJURY OR DEATH WHEN USING THIS PRODUCT.
WARNING:
• FOR USE WITH ONLY THOSE CENTERPOINT CROSSBOWS LISTED IN
THE COMPATIBILITY CHART (SECTION 5).
• ALWAYS CHECK THE CRANKING DEVICE FOR WORN, DAMAGED OR
MISSING PARTS BEFORE USING.
• ALWAYS INSPECT THE CRANKING DEVICE ROPES/CABLES FOR
SIGNS OF WEAR SUCH AS FRAYING, CUTS OR OTHER DAMAGES
BEFORE USING. REPLACE DAMAGED STRING BEFORE USING IT
AGAIN.
• ALWAYS CHECK TO MAKE SURE THE CRANKING DEVICE IS SECURELY
MOUNTED BEFORE CRANKING THE COCKING DEVICE.
• ALWAYS MAKE SURE THE CROSSBOW IS IN THE "ON SAFE"
POSITION BEFORE REMOVING THE CRANKING DEVICE.
• ALWAYS KEEP HAND, THUMB, AND FINGERS AWAY FROM MOVING
PARTS.
• NEVER USE THE CRANKING DEVICE IF THE COCKING DEVICE ROPES/
CABLES ARE TWISTED.
• NEVER DE-COCK THE CROSSBOW WITH CRANKING DEVICE. (SEE
CROSSBOW'S USER'S MANUAL ON HOW TO PROPERTY DE-COCK
A CROSSBOW).
• FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT
IN SERIOUS INJURY OR DEATH.
2
2. LEARNING THE PARTS OF YOUR COCKING DEVICE
Learning the names of the parts of your CenterPoint cocking
device will help you understand your owner's manual.
1. Release Pawl
2. Crank Assembly
3. Crank Arm Screw #6-32
X 3/8in Torx Screw (T10
Bit)
4. Mounting Clamp Screw
(2)
5. Mounting Clamp Top
6. Mounting Clamp
Bottom
7. Crank Arm
8. String Sled
9. Crank Shaft
10. Handle
11. Rope/Cable
3
