Eclipse CD7000 Manual Del Propietário página 88

Various Settings
Press the [SELECT] (Upper/Lower)
7
button to select files.
The selected item will be highlighted.
8
Press the [ENTER] button.
The CD-R or memory stick data is
read. While it is reading, [READING] is
displayed.
If the data can be read successfully,
[Completed] will appear on the display.
When using CD-R data, the CD-R will
automatically eject when reading is
complete.
ATTENTION
<When using a memory stick>
• Data downloaded from the ECLIPSE web
site (E-iSERV) can be saved in folders on
the Memory Stick as follows:
MSFTEN
User creation
DATA
XXXXXXX.ssw
• Files that can be imported into the main unit
are created automatically when downloaded
from the E-iSERV web site.
<When using a CD-R>
• The main unit can only import files from CD-
R that have been
directories.
XXXXXXX.ssw
Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
*CD-ROMs written in MODE2_FORM2 cannot
be read.
When data is imported from a CD-R, the
importing process will take a long time if a lot
of data other than the import data has also
been saved to the CD-R.
88
Automatic creation
File extension
written with root
Automatic creation
File extension
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.