Fermax DUOX VIDEO SKYLINE Manual De Instalador página 18

DUO X X X X X V V V V V ideo Sk DUO DUO ideo Sk ideo Sk
DUO DUO ideo Sk ideo Sk yline
DUO DUO X X X X X V V V V V ideo Sk DUO ideo Sk ideo Sk
ideo Sk yline
DUO DUO ideo Sk
D)
EN
MASTER Panel:
•
Apartment terminals programming is always done from the
panel activated as MASTER.
•
Any installation can only have one MASTER panel at a time,
whether a single or multiple block installation, once
configured as a sub-block, block or general entrance.
•
A street panel is configured as a MASTER via the SW1
amplifier button. If the SW1 button is pressed 3 times quickly,
it is activated as a MASTER panel and a confirmation tone
sounds (beep-beep), after 2 seconds.
•
When a panel is selected as MASTER, it notifies the rest of
the situation and if another was previously configured, it
would automatically stop being so.
•
If there are various blocks in an installation, we recommend
using the general entrance panel as MASTER since it allows
you to program all of its telephones/monitors.
•
Once having completed the terminal´s configuration, we
recommend deactivating the MASTER panel to avoid
accidentally reprogramming terminals.
•
The panel deactivates itself from master mode
following the same activation procedure: 3 quick presses
of the SW1 button. A deactivation tone sounds (bop), after
2 seconds.
Pag 18
yline yline
yline yline
yline yline
yline
yline