Hoover WindTunnel MAX Multi-Cyclonic Manual Del Propietário página 8

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.
SELECT PROPER TOOL
(Tools may vary per model)
m
c]
Z D c
_.-------_ D
A. Use Dusting/ Upholstery Tool to clean
upholstered furniture, draperies, mattresses,
clothing, and carpeted stairs. (Tool varies per
model)
B. Air-Powered Hand Tool may be used for
upholstered furniture, draperies, mattresses,
clothing, and carpeted stairs. (Tool varies per
model)
C. Telescoping Wand is used to give extra length
to your hose. Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs and
baseboards.
REMOVING HOSE
3.2 When using cleaning
tools, place cleaner
handle in the upright
position. The agitator
brushroll will not rotate
when the cleaner is in
the upright position.
To remove hose for tool
use, press the hose
release button and pull
hose end out.
To lock back into place,
push hose into hose
tube until you hear a
click.
A CAUTION A
To reduce the risk of personal injury from moving
parts, unplug vacuum before servicing.
ATTACHWAND AND TOOLS
(Tools may vary per model)
3.3 Attach tool or wand
to the hose (A).
Attach tool to wand (B)
A by pushing it firmly onto
the wand.
Twist wand or tool
slightly to tighten or
loosen the connection.
To extend wand, twist
counter-clockwise to
the unlocked position,
extend wand & twist
clockwise until tight.
Reverse to collapse.
A WARNING A
Unplug vacuum before connecting Air-
Powered Hand Tool.
HOW TO CLEANTOOLS
To clean Hose and Air-Powered Hand Tool, wipe
with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water
with a mild detergent. Rinse and air dry 24 hours
before using.
8 Actual model may vary from images shown.