ENGLISH
PROTECT YOUR LIFE AND READ THE OPERATING MANUAL
www.isafe-mobile.com/en/support/downloads
MAINTENANCE/REPAIR
See Operating Manual: www.isafe-mobile.com/en/support/downloads
DEVICE PROBLEMS/WARRANTY
www.isafe-mobile.com/en/support/service
APPLICATION SUPPORT
www.senseven.ai
DISTRIBUTION PARTNER
www.isafe-mobile.com/en/contact
SAFETY
Only use the device in explosion hazardous areas of zones 1/21 and 2/22 or outside of
explosion hazardous areas.
Before entering an explosion hazardous area with the device,
•
make sure the smartphone battery is screwed tight.
connect the IS540.1 Smartphone securely to the measurement electronics,
•
•
when using the Waveguide: install the sensor in the Waveguide,
•
make sure the system components are not damaged,
•
make sure that all the labels on the device are readable,
•
ensure that the sensors, Waveguide and Waveguide Lock are grounded by the user or
other i.safe MOBILE GmbH approved accessory when entering the ex zone,
•
make sure that the case is not taken into the ex zone.
If you use the device in an explosion hazardous area,
•
do not disconnect the 16-pin connector between the smartphone and the measurement
electronics,
•
always place the sensors and the Waveguide on a grounded surface,
•
do not damage the device.
Switch off the device immediately and leave the explosion hazardous area without delay if
•
malfunctions occur on the device,
•
you have damaged the housing of the device,
•
you have exposed the device to excessive loads,
•
the labels on the device are no longer readable.
Do not modify the device structurally.
Do not expose the device to high temperatures.
Do not expose the device to strong UV radiation.
Do not expose the device to processes with high electrical charges.
Do not expose the device to aggressive acids or bases.
4
