Idiomas disponibles
Idiomas disponibles
Regularly inspect ports and charging cable for debris, dirt, damage, and corrosion. DO NOT
attempt to repair device or cable; replace as needed.
Be sure laser level is turned off and disconnected from all power sources. Wipe with
a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
If storing for more than one month, charge completely before storage, and recharge
approximately every three months to avoid full discharge. Store in cool temperatures, mild
humidity, and away from direct sunlight (See GENERAL SPECIFICATIONS section). Leaving
in a vehicle or other confined spaces in extreme hot temperatures can lead to decrease in
service life, overheating, or fire. Extreme cold temperatures below the specified storage
range can also harm performance and service life. Keep away from corrosive chemicals and
gases. After taking out of storage, inspect visually to make sure device and all accessories
look satisfactory. Allow unit to return to ambient conditions before recharging.
See this product's page at www.kleintools.com for FCC compliance information.
Canada ICES-003 (B) / NMB-003 (B)
Do not place equipment and its accessories in the trash. Items must be
properly disposed of in accordance with local regulations. Please see
www.epa.gov/recycle for additional information.
450 Bond Street Lincolnshire, IL 60069
FCC AND IC COMPLIANCE
www.kleintools.com/warranty
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
INSPECTION
CLEANING
STORAGE
WARRANTY
www.kleintools.com
1-800-553-4676
11
