Idiomas disponibles
Idiomas disponibles
About the controls on the air conditioner
Vent Control
Thevent control islocatedbehindthe front grilleon the
right sideofthe air discharge area.WhenCLOSED, only
the air insidethe roomwill be circulatedand conditioned.
WhenOPEN, the vent allowsoutdoorfresh air exchange.
Toopenor closethe vent:
1. Remove thefront grille.
2. Remove thevent card screw.
3. Remove vent card,turn it overand replaceit by
locatingrear holein cardoverlocatingpin insideair
dischargeand reattachingscrewat front.
Theunit leavesthefactorysetat the CLOSE position.
ocatinghole
OPEN position
(Meshendtowardback)
hole
Screwhel
CLOSE position
(Meshendtowardfront)
Air Direction
Horizontal l ouvers
on thefront grille
letyou controlthe
air directionup and
down.
Cool Only Models
Auxiliary Controls - Dip Switches (location varies by model)
The auxiliary dip switch controls are located
behind the room cabinet-as shown in this figure.
The owner is responsible for checking switches
and ensuring they are in the desired position.
front grille
tjustthe vertical
louvers side-to-side
the air left
ght.
- Cool
(reserved
forfuture use)
Fan Cycle/Continuous
- Cool
When this switch is enabled (RIGHT),it allows the indoor
fan to cycle on/off with the compressor. When this
switch is disabled (LEFT), i t allows the indoor fan to run
continuously. The default setting is left (continuous).
FanCycle/Continuous -Cool
Heat/Cool
Models
Auxiliary
Controls
- Dip Switches
(location
varies
by model)
The auxiliary dip switch controls are located
behind the room cabinet-as shown in this figure.
The owner is responsible for checking switches
and ensuring they are in the desired position.
FanCycle/Continuous - Cool
FanCycle/Continuous - Heat
,t__
Class 2
m
Nofunction(reserved
UP
for futureuse)
DOWN
