Idiomas disponibles
Idiomas disponibles
ENGLISH
Removing the battery
To properly remove the battery for later recycling, you must remove the screws located on the
underside, on the side opposite the deck of the scooter.
7. ERROR CODES
If the electric scooter displays any of the following error codes, you should not attempt to
disassemble or repair the electric scooter yourself. Repairs carried out by unqualified persons
may result in injury or serious malfunctions. Please contact the place where you bought the
device or the official Cecotec Technical Support Service. The repair must be carried out by an
authorised technician and you must use only original spare parts.
E0: overheating protection
E1: motor failure
E2: motor phase failure
E3: brake failure
E4: accelerator failure
E5: low-voltage protection
E6: communication failure between controller and the display
E7: surge protection
E8: motor start-up signal
E9: motor block failure
8. TECHNICAL SPECIFICATIONS
Product reference
Product
Features
Dimensions
Weight
User requirements
68
07324
Bongo Serie D30 Mobile electric scooter
Measuring units
Folded
Unfolded
Electric scooter weight
Max. weight
Min-max height
Age bracket
Specifications
110 x 59 x 53.5 cm
110 x 59 x 118 cm (1)
15.5 kg
100 kg
100-200 cm
> 16 years old (2)
ORIGINAL MANUAL TRANSLATION
