Idiomas disponibles
Idiomas disponibles
NEXT TIME – Regular usage
●
Every time you want to manage the
machine through the App, first you have to
enable the
Smart Touch
the knob to the
Smart Touch
●
Make sure you have unlocked your phone
(from stand-by mode) and you have
activated the NFC function then, follow the
steps mentioned earlier.
●
If you want to start a
the laundry and close the door.
●
Select the desired function in the App (e.g.:
starting a programme, the Smart Check-
up cycle, update statistics, etc...).
●
Follow the instructions on the phone
display,
KEEPING IT ON
logo on the machine dashboard, when
requested to do so by the App.
NOTES:
Place your smartphone so that the NFC
antenna on its back matches the position
of the Smart Touch logo on the appliance
(as illustrate below).
mode by turning
indicator.
;
dry
cycle, load
the
Smart Touch
16
If you do not know the position of your NFC
antenna, slightly move the smartphone in a
circular motion over the
until the App confirms the connection. In
order for the data transfer to be successful,
it is essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE THE
FEW SECONDS OF THE PROCEDURE; a
message on the device will inform about the
correct outcome of the operation and advise
you when it is possible to move the
smartphone away.
Thick cases or metallic stickers on your
smartphone could affect or prevent the
transmission of data between machine
and telephone. If necessary, remove them.
The replacement of some components of
the smartphone (e.g. back cover, battery,
etc...) with non-original ones, could result
in the NFC antenna removal, preventing
the full use of the App.
The management and the control of the
machine via App is only possible "by
proximity": it is therefore not possible to
perform remote operations (e.g.: from
another room; outside of the house).
WIRELESS PARAMETERS
Parameter
Wireless Standard
ISO/IEC 14443 Type A and NFC Forum Type 4
Frequency band
13,553-13,567 MHz (centre frequency 13,560 MHz)
< 42dBμA/m (at 10 meters)
Magnetic field limit
With this the
Candy Hoover Group Srl,
declares that this appliance marked with
complies with the essential
requirements of the Directive 2014/53/EU.
To receive a copy of the declaration of
c o n f o r m i t y, p l e a s e c o n t a c t t h e
manufacturer at:
www.candy-group.com
Smart Touch
logo
Specifications
