Radio receiver
INTRODUCTION AND COMPATIBILITY
The receiver communicates with the connected thermostat, to transmit the heating command to
your heating system.
This product cannot be used on a stand-alone basis; it must be associated with the Somfy
Connected Radio-Controlled Thermostat ref. 1870775 / 1870777 / 2401499. It does not
work with any other thermostat model.
The radio receiver can control compatible heat pumps, boilers, pilot wire radiators & hydraulic
floor heating.
1. PRECAUTIONS TO TAKE BEFORE INSTALLATION
Make sure to switch off the power before installing your radio receiver.
2. INSTALLING THE RADIO RECEIVER
Copyright
2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
As far as possible, avoid installing the receiver too close to the body of the
boiler or any other metal object that could interfere with the radio waves.
It is advisable to mount the radio receiver on the wall by the edge of the
appliance, so that the controls are accessible (PROG button + indicator
light).
Mount the radio receiver using either double-sided adhesives, or screws
and plugs (supplied). Open the receiver by pressing the button situated on
top of it. Open the protective housing by loosening the 2 locking screws, so
that the terminal blocks are visible.
EN
11