Ferrite Core Kit - Panasonic PanaFlat PF70 Manual Del Usuario

Ferrite core kit
Ferrite core kit installation
When the ВМС connector type signal cable is used, connect the accessory ferrite core kit.
The connection wili not conform to the FCC-B type standard if the ferrite core kit is not installed.
This may cause signal reception disturbance in televisions, radios and other equipments.
Ш Precautions
Ferrite core kit Tie-wrap Signal cable With BNC connectors
(supplied) 1piece (supplied) 1piece (commercially available) 1piece
*The BNC connector type signal cable
is not supplied. Either purchase a
cable on the open market or use the
signal cable used for the computer.
UN Attach the ferrite core to the BNC connector cable where it separates
into five cables.
^ СУ
— M
E
E Secure the five ВМС connector cables together with the tie-wrap to
prevent the ferrite core from moving about.
ый Connect a BNC connector that matches the signal output of the computer
їп изе. (Refer to page 6)
ES
—22 —