Idiomas disponibles
Idiomas disponibles
be controlled with the switch is dangerous and must
be repaired.
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
etc. In accordance with these instructions, taking
into account the working conditions and the work
to be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
5) Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Nozzle
2. Air cap
3. Air cap retaining ring
4. Trigger
5. Paint volume control
6. Trigger unit
7. Release button
8. Air filter cap
9. Container
GB
10. Material tube
11. Material tube connection
12. Cord coupler adapter
13. Viscosity cup
14. Steel cleaning needle
15. Cleaning brush
2.2 Unpacking
Please check that the article is complete as specified
in the scope of delivery. If parts are missing, please
contact us. Open the packaging and take out the
equipment with care. Remove the packaging material
and any packaging and/or transportation braces (if
available). Check to see if all items are supplied.
Inspect the equipment and accessories for transport
damage. If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing or
suffocating!
Items supplied
Spray gun
Cleaning brush
Cleaning needle
Viscosity cup
1.8mm nozzle, mounted on the pistol
Replacement nozzle, 2.6 mm
Operating instructions
3. Proper use
The machine is suitable for spraying solvent-bor- ne
and water-borne paint, varnish, primers, trans- parent
lacquer, vehicle basecoats and clearcoats, stains and
wood preservatives. Alkali and acidic substances,
spray materials containing particles, latex paint and
non-drip/non-splatter paint must not be sprayed.
The equipment is to be used only for its prescri- bed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or inju- ries of any kind
caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
6
