Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
To keep your ice tasting fresh and your ice maker looking great, we
recommend cleaning your ice maker at least once per week.
1. Stop the ice-making cycle by pressing the "ON/OFF" key, unplug the
ice maker from the wall outlet and allow it to warm up to room
temperature.
2. If residual water is found in the ice tray, gently push the ice tray back
so that all water drains into the water reservoir.
3. Move the appliance forward to a position 75mm away from the
working table and open the drain plug to drain out excess water (see
Fig.3, Fig.4 and Fig.5).
4. Check and make sure the drain plug must be closed well. Fill the
water reservoir with clean water, then hold and press the "ON/OFF" key
for 10 seconds, the pump will start to pump water and keep running for
15 minutes, and it will enter into standby condition after running for 15
minutes, finally, open the drain plug and empty the water.
5. Wash the ice basket and ice scoop in warm soapy water. Rinse and
dry.
6. Clean the exterior of the ice maker with a soft damp cloth. Use a mild
dishwashing soap, if necessary.
NOTE:
1) Do not use organic solvent, boiled water, detergent, strong acid and
strong alkali etc. for cleaning.
7. Please empty the water reservoir and dry it for storage if the ice maker
is not used for a long time.
12
75mm
Fig.3
Fig.4
TROUBLESHOOTING
Problem
Possible causes
"ADD WATER"
1. Low water level or lack
indicator turns on
of water
2. The water screen at
the bottom of water
reservoir is blocked.
3. Pump malfunction.
Working table
Fig.5
Solution
1. Stop making ice,
refill water and then
press "ON/OFF" key
to restart ice-making
cycle.
2. Do cleaning
3. Ask qualified
technician for help.
13
