Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly of shoulder strap
The blower/vacuum is provided with a shoulder
strap (Fig. 1, item 5 and 12), to reduce fatigue
and provide comfort during the use of the
blower/vacuum; it can be used in whichever
way it suits the operator. Assemble it by
clipping the shoulder strap metal buckle (h) to
the upper part of the blower/vacuum main
body, as shown in figura 6.
To turn the blower/vacuum on:
Connect the blower/vacuum power supply
✔
plug to an electric extension.
Make sure the blower/vacuum front tube is not
✔
directed to people or dangerous conditions.
To turn the blower/vacuum on, check
✔
whether the tube is properly fitted. Before
selecting the vacuum or blow function, make
sure the lever is working smoothly, and that it
is not obstructed by debris from previous uses.
Select the vacuum or blow function with the
selector lever located on the side of the
equipment (i) and press the switch trigger (j).
Figure 7
Assembly Prior to Use
Using the Blower/Vacuum
i
38
ENGLISH
h
Figure 6
Figure 8
To switch the blower/vacuum off:
Release the hand that presses the switch trigger
(Figure 1, item 3) and the blower/vacuum
will stop.
Extension cord restraint
1.
The extension lock is incorporated into the
lower rear part of the equipment body.
2.
The cord restraint supports the power supply
cord and prevents accidental disconnection
of the equipment during use should the
supply cord be pulled.
j
Tabla de contenido
